High voltage power supply for X-ray source RS 40B1.
The XRHV01-PS unit provides a 0 to 15 kV output voltage and 800 W max. output power. The power supply is controlled via analogue I/O by XR40B-EC. The high voltage can be set via 0 – 5 V analog input, corresponding to a monitored 0 – 15 kV output voltage. The current limit can be set via 0 – 5 V analog input corresponding to a monitored output current of 0 – 50 mA. The output is fully protected in case of either short or overload current. Full functionality only in connection with the Emission Controller XR40B-EC.
| Supply voltage | 85 – 260 VAC, 50/60 Hz |
| Output voltage range (VO) | 0 – 15 kV |
| Output current range (IO) | 0 – 50 mA |
| Max output power | 800W |
| Voltage regulation | <0.005% |
| Polarity | positive |
| Remote control | via indirect coupled analogue I/O (male D-SUB 9) | set and monitor 0 – 5V |
| Protection | over load and short circuit, voltage supply and temperature |
| Dimensions | 483 x 45 x 420 mm (W x H x D), 19″ rack mountable |
| Weight (approx.) | 6.5 kg |