Ion Source IS 40F1 L=143

The Ion Source IS 40F1 is a compact, easy-to-use extractor type ion gun with a focus function. It is mainly used for sample surface cleaning, but the focus feature enables more possibilities

Ion Source IS 40C1 with IS40-PS 110-230V power supply and cables

The Ion Source IS 40C1 is a compact, easy-to-use extractor type ion gun for sample surface cleaning.

Available: L-76-Cu, L-120-SS, L-143-Cu, L-76-Cu, L-97,5-Cu, L-62,5-CU.

Flood Source FS 40A1 L=145 (Cu shield) with Power Supply FS 40A-PS 230V and cable 7.5m

Low cost electron Flood Source for charge neutralisation of insulators or semiconductors in XPS/AES and SIMS applications.The Flood Source operates in two energy ranges, is fully software controlled and can also be supplied with custom insertion lengths (145 – 421 mm, other on request) and shielding materials, e.g. mu-metal, copper.

Electron Source ES 40C1 L=155,7

The ES 40C1 Electron Source is a scanable electron gun with small spot profile. Due to the high transmission of its Einzel-Lens, the ES 40C delivers a high electron beam current over  a wide energy range.

Sample Heating Power Supply HEAT3-PS with two independent external DC modules

The HEAT3-PS is used for resistive heating or electron bombardment heating. The power supply can also be used for effusion cell evaporators. The unit is equipped with a PID temperature control

Set: Ion Source IS 40E1 with IS40-PS 110-230V power supply and cables

The IS 40E1 Ion Source is a two lens, extractor type, focused, differentially pumped ion gun.The source is able to raster a
10 mm x 10 mm area of the surface at the recommended working distance.

Flood Source Power Supply FS40-PS 100-240V with RS232/485 + Ethernet interface

The FS40-PS power supply allows fine adjustment of all instrument parameters for achieving a wide range of beam profiles.

Magnetron Power Supply M600DC-PS 100-240V with RS232/485 + Ethernet interface

The M600DC-PS is compact switch-mode DC power supply designed to drive magnetron sources. All adjustable parameters are displayed on the large TFT display with touchscreen.

TSP03-PS 110-230V with RS232/485 + Ethernet interface, for TSP cartridge (pump) (without pump cable!)

The TSP03-PS Titanium Sublimation Pump Power Supply isconfigured for constant filament current operation and
features a thyristor and phase-control circuit for long-term
and trouble-free TSP operation.

Power supply HEAT3-PS RES/EB POS 110-230V, interface: RS232/485, EtherNet/IP

The HEAT3-PS is used for resistive heating or electron bombardment heating. The power supply can also be used for effusion cell evaporators. The unit is equipped with a PID temperature control

High Intensity UV Source UVS 40A2 L=220 with UV40A-PS 110-250V power supply and cables

The UV Source (UVS) is a high intensity photon source that can be operated with a variety of discharge gases. The UVS 40A2 is used in UPS (ultraviolet photoelectron spectroscopy) research.

Set: X-Ray Source RS 40B1 with equipment, 110V

The RS 40B1 X-ray Source is a high intensity twin anode Al/Mg source optimized for XPS and high pressure XPS experiments. Design of the anode, filament and source housing guarantees maximum X-ray intensity and very low crosstalk between the anode faces.

Double Filament Effusion Cell EF40C1DF, L-380

EF 40C1DF Double Filament Effusion Cell is a source with two independently operated filaments for greater convenience in the evaporation process.

Ion Multi Gauge Controller MG15 110-230VAC, Ethernet Interface, RS232/485, without cable for UHV head, 1 x BA/EXT, 4 x active 0-10V

The MG15 is able to support four active gauges and up to three passive gauges, extending the measurement range to 2×10-12 mbar. The unit is fully software controlled.

Flood Source FS 40A1 L=145-CU

Low cost electron Flood Source for charge neutralisation of insulators or semiconductors in XPS/AES and SIMS applications.The Flood Source operates in two energy ranges, is fully software controlled and can also be supplied with custom insertion lengths (145 – 421 mm, other on request) and shielding materials, e.g. mu-metal, copper.

Contact

Phone: +48 32 459 2000
Email: sprzedaz@prevac.pl
Raciborska Str. 61, 44-362 Rogów, Poland

What are you looking for?

Type your query and press Enter.

Search