The TSP04-PS Titanium Sublimation Pump Power Supply is configured for constant filament current operation and features a high efficiency up to 92% sine wave inverter circuit for long-term and trouble-free TSP operation.
Depending on the purchased variant device can be configured to operate single pump or two pumps alternately. New case design improves space efficiency as TSP04 takes only 2HU half rack. Unit can be remotely controlled via RS232/485 or Ethernet interfaces. The unit is equipped with autosave function (the device save your parameters preset and apply them automatically after restart).
| Supply voltage | 110-230 V, 50 Hz/60 Hz (power consumption max 750 W) |
| Output current | regulated at 1 to 56 A, RMS × 1 A |
| Output voltage | determined by the lead – max 10 V at 50 A |
| Timing: | sublimation period: 1 s to 15 min × 1 s delay interval: 1 min to 99 h × 1 min degas time: 1 s to 15 min × 1 s operate time: 99 d 23 h 59 min |
| Communication interface | RS232/485, Ethernet |
| Communication protocol | MODBUS-TCP |
| User Interface | 5″ TFT display with touchscreen |
| Interface languages | English, Polish |
| Dimensions | 242 x 87 x 450 mm (W × H × D) 19” rack mounted unit (half-width, 2U height) |
| Weight (approx.) | 6.65kg |
The Titanium Sublimation Pump Controller regulates the quantity of material sublimated from the filaments, compensating for changing conditions and eliminating the need for operator attendance or adjustment. Depending on the device variant up to 2 processes can be set up, each using a separate 3 filament pump. Separate safety interlock for each pump is available. One filament at the time can be operated to avoid the fracture of the Ti filament due to the thermal stress or the structural change of Ti, ramp time and max. current for each filament can be set. All parameters of each filament can be set individually (max current, ramp time, filament number etc.).
Additional information
Type your query and press Enter.
