M1600-PDC MAGNETRON POWER SUPPLY

The M1600-PDC is compact switch-mode DC pulse power supply designed to drive up to 3 magnetron sources.

All adjustable parameters are displayed on the large TFT display with touchscreen. All settings can be manually adjusted or can be stored and recalled automatically after unit switch on. The unit also features a built in timer and automatic standby mode. It is fully interlocked for both, user and device safety. Unit can be remotely controlled via one of available analog or digital interfaces.

FEATURES

• Pule DC or standard DC mode
• Switch for 3 magnetron sources with shutters control
• Adjustable limits of voltage, current and power separately for each output
• Multiple I/O – individual programmable
• Thickness and evaporation rate measurements (support for Thickness Monitors TM13 /14)
• Vacuum measurements (support for active vacuum gauges)
• Mass Flow Controller support

TECHNICAL DATA

• Supply voltage 100 – 240 V, 50-60 Hz
• Output voltage up to 1200 V (from 250 V)
• Output current up to 3000 mA (from 1 mA)
• Output power up to 1600 W* (from 1 W)
• Switch-mode 3 outputs for magnetrons
• Analog inputs/outputs 5 (0 – 10V)/ 5 (0 – 10V)
• Digital inputs and outputs individual programmable
• Timer dual mode timer 0 s – 99 h 59 min.
• Vacuum measurement 1 channel for active vacuum gauges: CTR90, TTR90, TTR91, TTR211, PTR225, PTR90, ITR90, ITR100, Baratron, ANALOG IN, MKS937A, PG105, MG13/14, PKR251/360/361, PCR280, ATMION
• Thickness and evaporation rate measurements 1 channel for Thickness Monitors TM13 /14
• Mass Flow Controller 1 channel
• Communication interface RS232/485, Ethernet
• Communication protocol MODBUS-TCP/RTU
• User interface 5″ TFT display with touchscreen, digital encoder
• Interface languages English
• Dimensions 485,6 x 87 x 450 (W×H×D),
• Weight (approx.) 11 kg
• Pulse frequency: 10-350 kHz
• Pulse off time: 0.4µs-10µs

*Power is limited to 1000W when mains is less than 150V